4-4 Compaq ServerNet II PCI Adapter and Switch Installation Guide
Accessing ServerNet II in the CIM Utility
To access the CIM ServerNet II information, perform these steps:
1. Log onto CIM XE. The following screen appears:
2. Select the Settings icon from the top of the page. The Automatic Discovery
screen appears:
3. Configure CIM XE to discover your ServerNet II SAN by adding the IP address ranges for
the servers. Otherwise, they will not be seen by CIM XE. You can also set the Discovery
Protocols as desired. Consult your CIM XE documentation for information about
configuring this function or select
4. Select the Devices icon at the top of the page. The Overview screen appears.
?
for Help on this screen.