Compaq ServerNet ServerNet II Installation Manual page 142

============================
Results of the Topology Test
============================
The Topology Test FAILED.
This test was run from (Local Host) computer 'HW-TB6-S10'.
The following 6 nodes are configured in the SAN. Their names
and Globally Unique Ids (GUIDs) are given.
HW-TB6-S03 GUID {0x0053 0x0001c726 0F1040}
HW-TB6-S10 GUID {0x0053 0x0001c726 0F1080}
HW-TB6-S11 GUID {0x0053 0x0001c726 0F1000}
HW-TB6-S12 GUID {0x0053 0x0001c726 0F10C0}
SwitchX GUID {0x0053 0x00000015 V0H961}
SwitchY GUID {0x0053 0x00000015 V0KVWJ}
The following 1 nodes are configured in the SAN but were
not found. They might have failed or be turned off. Their names
and Globally Unique Ids (GUIDs) are given.
SwitchY GUID {0x0053 0x00000015 V0KVWJ}
SAN node 'HW-TB6-S10' GUID {0x0053 0x0001c726 0F1080}
has at least 1 of its ServerNet ports mis-connected. The
following are the connections for all of the node's ports.
Expected and actual connections are given for mis-connected
ports. Either reconfigure the SAN topology using the
SANUtil application or manually fix the cable mis-
connections.
PORT 0 EXPECTED GUID {0x0053 0x00000015 V0H961}
PORT 1 EXPECTED GUID {0x0053 0x00000015 V0KVWJ}
PORT 1 ACTUAL GUID {}
SAN node 'HW-TB6-S11' GUID {0x0053 0x0001c726 0F1000}
has at least 1 of its ServerNet ports mis-connected. The
following are the connections for all of the node's ports.
Expected and actual connections are given for mis-connected
ports. Either reconfigure the SAN topology using the
SANUtil application or manually fix the cable mis-
connections.
PORT 0 EXPECTED GUID {0x0053 0x00000015 V0H961}
PORT 1 EXPECTED GUID {0x0053 0x00000015 V0KVWJ}
PORT 1 ACTUAL GUID {}
SAN node 'SwitchY' GUID {0x0053 0x00000015 V0KVWJ}
has at least 4 of its ServerNet ports mis-connected. The
following are the connections for all of the node's ports.
Expected and actual connections are given for mis-connected
ports. Either reconfigure the SAN topology using the
SANUtil application or manually fix the cable mis-
connections.
PORT 0 EXPECTED GUID {0x0053 0x0001c726 0F1000}
PORT 0 ACTUAL GUID {}
PORT 1 EXPECTED GUID {0x0053 0x0001c726 0F1040}
PORT 1 ACTUAL GUID {}
PORT 2 EXPECTED GUID {0x0053 0x0001c726 0F1080}
PORT 2 ACTUAL GUID {}
PORT 3 EXPECTED GUID {0x0053 0x0001c726 0F10C0}
PORT 3 ACTUAL GUID {}
PORT 4 EXPECTED GUID
PORT 5 EXPECTED GUID
PORT 6 EXPECTED GUID
PORT 7 EXPECTED GUID
PORT 8 EXPECTED GUID
PORT 9 EXPECTED GUID
PORT 10 EXPECTED GUID
PORT 11 EXPECTED GUID
SAN node 'HW-TB6-S12' GUID {0x0053 0x0001c726 0F10C0}
has at least 1 of its ServerNet ports mis-connected. The
following are the connections for all of the node's ports.
Expected and actual connections are given for mis-connected
ports. Either reconfigure the SAN topology using the
SANUtil application or manually fix the cable mis-
connections.
PORT 0 EXPECTED GUID {0x0053 0x00000015 V0H961}
PORT 1 EXPECTED GUID {0x0053 0x00000015 V0KVWJ}
PORT 1 ACTUAL GUID {}
SAN node 'HW-TB6-S03' GUID {0x0053 0x0001c726 0F1040}
has at least 1 of its ServerNet ports mis-connected. The
following are the connections for all of the node's ports.
Expected and actual connections are given for mis-connected
ports. Either reconfigure the SAN topology using the
SANUtil application or manually fix the cable mis-
connections.
PORT 0 EXPECTED GUID {0x0053 0x00000015 V0H961}
PORT 1 EXPECTED GUID {0x0053 0x00000015 V0KVWJ}
PORT 1 ACTUAL GUID {}
Figure G-22. Example 19 Results of the Topology Test Running on computer HW-TB6-S10
ServerNet II Diagnostics Examples G-19
NAME 'SwitchX'
NAME 'SwitchY'
NAME 'SwitchX'
NAME 'SwitchY'
NAME 'HW-TB6-S11'
NAME 'HW-TB6-S03'
NAME 'HW-TB6-S10'
NAME 'HW-TB6-S12'
NAME 'SwitchX'
NAME 'SwitchY'
NAME 'SwitchX'
NAME 'SwitchY'