Compaq ServerNet ServerNet II Installation Manual page 12

Switch Front Panel
One on/off pushbutton power switch
I
One power on indicator (green), which indicates the Switch is powered on
I
One Fault indicator (yellow), which indicates a Switch fault
I
X and Y indicators (green), which identify the Switch fabric configuration
I
Twelve port link-alive indicators (green), which indicate link, no link, or fault on the
I
ports; numbered from left to right on the front bezel, 0 through 11
Two-digit static numeric label, optional identifier for the Switch
I
Switch Side Panel Connectors
Twelve 8-pin interface cable connectors on the Switch, numbered as indicated in the
I
illustration below:
Figure 1-3. Switch Port Numbering and Cable Connections
Twelve port link-alive indicators (green), one beside each port on the Switch; indicate link
I
(on) or no link (off) on the ports
Cable-routing assembly
I
Switch Rear Panel
AC power receptacle on the power supply
I
Two fan outlets
I
Power supplies (two types) are pictured below. Some Switch power supplies are auto-
I
sensing and have no voltage selection switch.
ServerNet II Introduction 1-5