Snetadaptrxportstatuschange - Compaq ServerNet ServerNet II Installation Manual

snetAdaptrXPortStatusChange

The Adapter agent extension has detected a change in the status of the Adapter.
Specific Trap:
Severity:
Summary:
Enable:
Disable:
Returned Variable
snetAdaptrStatus
snetAdaptrSnetID
If the status is now OK, the X port is now OK.
The status of either the X port has changed. If the status
is degraded or failed possible causes could be a cable
is not properly connected, a broken cable, a bad
Adapter, a bad remote port.
2
Critical
Status is now %d.
snetMibXPortStatusTrapEnable = 1
snetMibXPortStatusTrapEnable = 0
Identifies the current Adapter device status
Identifies the ServerNet II ID of the X port on the Adapter
Possible Cause
ServerNet II PCI Adapter SNMP Traps K-3
Indicates
Possible Solution
None needed.
Check the cable to make sure it is properly connected at both
ends. Swap out the cable. Swap the Adapter.