Interface Cable Features - Compaq ServerNet ServerNet II Installation Manual

1-6 Compaq ServerNet II PCI Adapter and Switch Installation Guide
Figure 1-4. Switch Power Supply (with voltage switch selector)
Figure 1-5. Switch Power Supply (without voltage switch selector)

Interface Cable Features

Interface cables that connect the nodes are not included and you must order them separately. See
the section "ServerNet II Kits" in this chapter for part numbers.
Cable features include:
Supports IEEE industry standard, copper serial 1000Base-CX interfaces
I
Maximum cable length 25 meters (81.25 feet)
I
See Appendix D, "ServerNet II Specifications," for moare cable specifications.
Voltage Switch
Be sure to set correctly
before plugging in
the power cord.
Power Socket
Remove the seal before
plugging in the power cord.