Compaq ServerNet ServerNet II Installation Manual page 15

Pci adapter and switch
Hide thumbs Also See for ServerNet ServerNet II:
Table of Contents

Advertisement

1-8 Compaq ServerNet II PCI Adapter and Switch Installation Guide
Support Components
SNMP Adapter Component (SNMP-spa) — SNMP support for the Adapter
I
SNMP Switch Component (SNMP-sw) — SNMP support for the Switch
I
SNMP VI Agent Component (SNMP-vi) — SNMP support for the Virtual Interface (VI)
I
Compaq Insight Manager (CIM) XE ServerNet II Support — ServerNet II is compatible
I
with the Compaq web-based management tool Insight Manager XE (CIM). From a web
browser, you can connect to a server running Compaq Insight Manager XE and monitor
and manage all ServerNet II nodes and Switches.
Software to run CIM XE is provided on the Compaq Management CD packaged with all
Compaq ProLiant servers. Software to monitor ServerNet II from CIM XE is provided on
the ServerNet II CD. This software includes the Compaq Insight Manager XE ServerNet
II Extension and the ServerNet II SNMP agents.
For more information about CIM XE, see the section "Compaq Insight Manger XE (CIM
XE)" in Chapter 4 of this guide.
IMPORTANT: If you want to monitor your ServerNet II SAN using CIM XE (SNMP), you must enable
(install) SNMP Services in Windows 2000. This must be done before you can install ServerNet II SNMP
agents and drivers. If SNMP services are disabled, no SNMP agents (including those for ServerNet II)
will load.
If you did not install these services when you initially installed Windows 2000, you need to add them
from the Windows 2000 CD Management and Monitoring Tools window on the Windows 2000 CD. After
you install the services, you must open the Windows Control Panel/Computer Manager/Services and
configure the parameters listed there. See the Windows 2000 documentation for help with configuring
these parameters.
Compaq Windows Sockets Direct Component
SAN Service Provider System DLL — Software that allows Microsoft Windows Sockets
I
Direct application to route data over the Compaq SAN Service Provider through
ServerNet II, the Compaq SAN interconnect. See Appendix N, "Compaq Windows
Sockets Direct SAN Service Provider" in this guide for more information.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Servernet ii

Table of Contents