Snetswitchlinkalivechange - Compaq ServerNet ServerNet II Installation Manual

snetSwitchLinkAliveChange

The Switch detected that a ports link-alive status changed. The link may have been
functional and it is now nonfunctional, or the link may have been nonfunctional and it is
now functional.
Specific Trap:
Severity:
Summary:
Enable:
Disable:
Returned Variable
snetSwitchSnetID
snetSwitchName
snetSwitchPortErrorStatusIn
dex
snetSwitchPortStatus
If the port is now nonfunctional:
A disconnected, loose or defective SAN cable
Distant switch powered off
Distant daughter card defective
Distant node power is off
If the port is now functional:
A problem is corrected
If the port is intermittent:
For no apparent reason, the port is sometimes
functional and sometime nonfunctional
100
Major
Switch snetSwitchSnetID, (snetSwitchName) has detected a change in status
of port snetSwitchPortErrorStatusIndex. The Switch port status is
snetSwitchPortStatus.
snetSwitchLinkAliveTrapEnable = 1
snetSwitchLinkAliveTrapEnable = 0
Identifies the switch that detected the link status change
The switch name. If no name is defined, this field will be blank.
Indicates the port that detected the link status change
The current port status
Possible Cause
ServerNet II Switch SNMP Traps J-3
Indicates
Possible Solution
Reattach or replace SAN cable
Apply power to the distant Switch
Replace defective daughter card
Apply power to the distant node
No action necessary
A component, such as a Switch, daughtercard
or cable is defective.