Compaq ServerNet ServerNet II Installation Manual page 110

Pci adapter and switch
Hide thumbs Also See for ServerNet ServerNet II:
Table of Contents

Advertisement

E-8 ServerNet II PCI Adapter and Switch Installation Guide
Table E-2
SANMan Event Log Messages
Event ID
Type
0xE
Information
0x1A
Error
0x1B
Error
0x1C
Error
0x1D
Error
0x1E
Error
0x2A
Error
0x2B
Error
0x2C
continued
Event Message: Local ServerNet ID found and validated with switches.
Corrective Action: None.
Event Message: TCM component of SANMan failed due to inability to allocate memory for
local server order pool.
Corrective Action: Increase the physical memory. If the problem persists, contact your
service provider.
Event Message: TCM component of SANMan failed due to inability to start its worker
threads.
Corrective Action: Check the Windows 2000 installation for the correct NT version and
reboot the machine.
Event Message: TCM component of SANMan unable to defer request as no local server
orders left.
Corrective Action: Check the SAN for a loose connection and reboot the machine.
Event Message: Primary SANMan node cannot find itself in the RTD.
Corrective Action: Re-install SANMan on the SAN Administrative node with the correct
host name.
Event Message: Primary SANMan node not able to add itself to the RTD.
Corrective Action: Re-install SANMan on SAN Administrative node with the correct host
name.
If the problem persists, increase the physical memory of the system and reboot.
If the problem still persists, contact your service provider.
Event Message: ServerNet IDs from RTD and X and Y switches are not identical.
Corrective Action: Verify that the X-fabric and Y-fabric Switches are correctly installed to
the SAN and powered on.
Check the connections and reboot.
Event Message: Failed to read valid RTD from Registry (first time for primary SANMan).
Corrective Action: Reinstall SANMan on the node because the SANMan registry entries are
incorrect.
Event Messages: RTD read from registry failed sanity checks.
Corrective Action: Reinstall SANMan on the node because the SANMan registry e entries
are incorrect. If the problem persists, contact your service provider.
Event Message and Corrective Action
continued

Advertisement

Table of Contents
loading

This manual is also suitable for:

Servernet ii

Table of Contents