Snetadaptryportstatuschange; Adapter Agent Extension Caching - Compaq ServerNet ServerNet II Installation Manual

K-4 Compaq ServerNet II PCI Adapter and Switch Installation Guide

snetAdaptrYPortStatusChange

The Adapter agent extension has detected a change in the status of the Adapter's Y-port.
Specific Trap:
Severity:
Summary:
Enable:
Disable:
Returned Variable
snetAdaptrYPortStatus
SnetAdaptrSnetID1
If the status is now OK, the Y port is now OK.
The status of the Y port has changed. If the
status is degraded or failed possible causes
could be a cable is not properly connected, a
broken cable, a bad Adapter, a bad remote port.

Adapter Agent Extension Caching

The Adapter agent extension restricts the frequency of its calls to the ServerNet II Adapter to
prevent degradation of ServerNet II performance. The Adapter agent extension will only
retrieve data from the ServerNet II Adapter when it is requested. It will not poll continuously
for data.
3
Critical
Status is now %d.
snetMibYPortStatusTrapEnable = 1
snetMibYPortStatusTrapEnable = 0
Identifies the current status of the Adapter's Y-port
Identifies the ServerNet II ID of the Y port on the Adapter
Possible Cause
Indicates
Possible Solution
None needed.
Check the cable to make sure it is properly connected at
both ends. Swap out the cable. Swap the Adapter.