Results From Topology Test - Compaq ServerNet ServerNet II Installation Manual

G-40 ServerNet II PCI Adapter and Switch Installation Guide

Results from Topology Test

The next four examples show the Topology Test results from each computer for the problem
shown in Figure G-38.
============================
Results of the Topology Test
============================
The Topology Test FAILED.
This test was run from (Local Host) computer 'HW-TB6-S03'.
The following 6 nodes are configured in the SAN. Their names
and Globally Unique Ids (GUIDs) are given.
HW-TB6-S03
HW-TB6-S10
HW-TB6-S11
HW-TB6-S12
SwitchX
SwitchY
SAN node 'HW-TB6-S03' GUID {0x0053 0x0001c726 0F1040}
has at least 2 of its ServerNet ports mis-connected. The
following are the connections for all of the node's ports.
Expected and actual connections are given for mis-connected
ports. Either reconfigure the SAN topology using the
SANUtil application or manually fix the cable mis-
connections.
PORT 0 EXPECTED
PORT 0 ACTUAL
PORT 1 EXPECTED
PORT 1 ACTUAL
Figure G-47. Example 42 Results of the Topology Test Running on computer HW-TB6-S03
GUID {0x0053 0x0001c726 0F1040}
GUID {0x0053 0x0001c726 0F1080}
GUID {0x0053 0x0001c726 0F1000}
GUID {0x0053 0x0001c726 0F10C0}
GUID {0x0053 0x00000015 V0H961}
GUID {0x0053 0x00000015 V0KVWJ}
GUID {0x0053 0x00000015 V0H961}
GUID {0x0053 0x00000015 V0KVWJ}
GUID {0x0053 0x00000015 V0KVWJ}
GUID {0x0053 0x00000015 V0H961}
NAME 'SwitchX'
NAME 'SwitchY'
NAME 'SwitchY'
NAME 'SwitchX'