Compaq ServerNet ServerNet II Installation Manual page 78

============================
Results of the Topology Test
============================
The Test FAILED.
The SAN Topology is configured with 12 physical links.
The following 6 node are configured in the SAN. Their names
and Globally Unique Ids (GUIDs) are given.
Switch1x GUID (0x0123 0x456789ab ABCDEF 0x12345678)
Switch1y GUID (0x0123 0x456789ab ABCDEF 0x12345678)
COMPUTER1 GUID (0x0123 0x456789ab ABCDEF 0x12345678)
COMPUTER2 GUID (0x0123 0x456789ab ABCDEF 0x12345678)
COMPUTER3 GUID (0x0123 0x456789ab ABCDEF 0x12345678)
COMPUTER4 GUID (0x0123 0x456789ab ABCDEF 0x12345678)
The following nodes were found to be connected to the SAN but
are not part of the configured topology. Disconnect these nodes
from the SAN, or configure them into the SAN using the SANUtil
application. The Globally Unique Id (GUID) of each node is
given followed by a Source Route to the node.
GUID (0x0123 0x456789ab ABCDEF 0x12345678)
GUID (0x0123 0x456789ab ABCDEF 0x12345678)
'COMPUTER3' GUID (0x0123
has at least 2 of its ServerNet ports mis-connected. The
following are the connections for all of the node's ports.
Expected and actual connections are given for mis-connected
ports. Either reconfigure the SAN topology using the
SANUtil application or manually fix the cable mis-
connections.
PORT 0 EXPECTED
PORT 0 ACTUAL
PORT 1 EXPECTED
PORT 1 ACTUAL
Figure 3-2. Example 2 -- Topology Test Results
Errors were found with 2 ServerNet ports.
0x456789ab ABCDEF
GUID (0x0123 0x456789ab ABCDEF 0x12345678) NAME Switch1x
GUID (0x0123 0x456789ab ABCDEF 0x12345678) NAME Switch1Y
GUID (0x0123 0x456789ab ABCDEF 0x12345678) NAME Switch1Y
GUID (0x0123 0x456789ab ABCDEF 0x12345678) NAME <unknown>
Using ServerNet II Diagnostics 3-7
Source Route (0 3)
Source Route (1 3)
0x12345678)