35. Enter the Node Name (not case-sensitive), which is the Windows 2000 name for this
server. This name differs for each end node and is the "Computer Name" shown in the
ServerNet Configuration Wizard when you configured the node. See the section
"Configuring the Primary Administrative Node" in this chapter.
36. Click OK. This adds one end node to the both the X and Y fabric SAN.
NOTE: This illustration shows both Switches
node
are now added (blue).
37. Repeat the Steps 1-36 in this section to add the other end nodes. As you add each, the icon
representing the node should turn blue to indicate the node is added.
Installing Drivers and Software 2-29
, the primary node
, and the secondary