Compaq ServerNet ServerNet II Installation Manual page 214

2 Compaq ServerNet II PCI Adapter and Switch Installation Guide
Interactive mode
Invalid source route
Local host
Management Information Base
Node
Peripheral Component Interconnect
Primary administrative node
Resident Topology Description
Routing Test
SANMan
SANMan Administrative Utility
SAN Service Provider
SANUtil
ServerNet II
ServerNet II Configuration Wizard
ServerNet II IDs
SnetSanP.dll
SPA
ServerNet II PCI Adapter Driver
ServerNet II Switch 2
Diagnostic that lets you perform echo and routing tests for selected
nodes and paths. It provides more detailed information than the
batch mode. Requires knowledge of commands and Command Line
Interface (CLI).
Source route that does not exist on the network in question. See
also Target node.
Machine from which you are running Diagnostics tests.
MIB A conceptual database of objects that can be defined and accessed
by a network management protocol such as SNMP. These objects
describe the configuration, status, and statistical information stored
at a managed network device.
Part of the SAN topology comprised of a ServerNet II Adapter
installed in a Compaq ProLiant server. In a ServerNet II topology:
I An end node is any node in a SAN topology other than the
primary administrative node or a node in a switchless SAN
topology.
I The primary administrative node is the node you designate
(through the ServerNet II software) as the management node.
There is only one primary administrative node in a SAN
topology. Switchless topologies do not have a primary
administrative node.
PCI A high-speed burst-multiplexed address/data bus that connects
peripheral devices to the processor and memory.
See Node.
RTD Description of the SAN topology obtained by SANMan during
Diagnostics
Diagnostic test that validates that the specific paths between the
node (where the diagnostic is being run) and other nodes and
Switches are functional.
See System Area Network Management driver.
SANUtil GUI used to configure and define the SAN cluster topology
SnetSanP.dll See Compaq Windows Sockets SAN Service Provider.
See SANMan Administrative Utility
SN II Second ServerNet release; includes VI support and improved
functionality and manageability. Not compatible with the previous
release of ServerNet.
Utility for configuring ServerNet II nodes
SNID Dynamically-assigned, unique SAN port address
See Compaq Windows Sockets SAN Service Provider.
ServerNet II PCI Acronym that may be found in some examples and software files;
Adapter synonymous with the ServerNet II PCI Adapter
SPAD2 Driver software for the Adapter that is installed on a server running
Microsoft Windows 2000.
Switch 2 Term that may be found in some examples and software files and is
synonymous with the 12-port ServerNet II Switch