How Diagnostics Works; Overview - Compaq ServerNet ServerNet II Installation Manual

Overview

This appendix contains technical information about ServerNet II Online Diagnostic, including:

How diagnostics works

I
Diagnostics directory structure
I
Interactive Diagnostics Mode
I
How Diagnostics Works
ServerNet II Online Diagnostics runs on a computer (the "local host computer") that is attached
to the ServerNet II System Area Network (SAN), as shown in Figure H-1. The target, against
which the Diagnostics are run, is a Switch or node located on the ServerNet II SAN. The results
of the Diagnostics are displayed on the local host computer monitor.
Figure H-1. Local Host Computer Connected to a ServerNet II Switch
The test results text file is readable with Microsoft Notepad or other word processors. The test
results file name uses an incrementing name. The name of the first file is results001.txt. Each
ServerNet II Diagnostics Resources
Local Host Computer
(Online Diagnostics run here)
ServerNet
Adapter
ServerNet
Cable
H
Appendix
ServerNet
Switch