Snetswitchtopologyconfigupdate; Snetswitchfanfailure - Compaq ServerNet ServerNet II Installation Manual

snetSwitchTopologyConfigUpdate

The ServerNet II topology configuration has been updated or changed.
Specific Trap:
Severity:
Summary:
Enable:
Disable:
None
ServerNet II topology has been updated

snetSwitchFanFailure

The ServerNet II Switch detected a fan failure. The power module should be replaced
immediately to prevent switch component damage.
Specific Trap:
Severity:
Summary:
Enable:
Disable:
snetSwitchSnetID
snetSwitchName
Switch fan has failed.
Returned Variable
Possible Cause
110
Critical
Switch snetSwitchSnetID, (snetSwitchName), detected a fan failure.
Always enabled
Cannot be disabled
Returned Variable
Possible Cause
ServerNet II Switch SNMP Traps J-11
109
Information
ServerNet II Configuration has been updated.
Always enabled
Cannot be disabled
Indicates
Possible Solution
No solution necessary
Indicates
Identifies the switch that detected the failure.
The name of the switch that detected the fan failure.
Possible Solution
Replace power module immediately to prevent component
damage.