Nortel DMS-100 Series Replacement Procedures page 48

1-16 XPM card replacement procedures (continued)
NT6X85
in an SMS-R
(continued)
5
6
7
297-8021-547 Standard 14.02 May 2001
LINK 0: RCS BRCS 00 0
LINK 1: RCS BRCS 00 1
LINK 2: RCS BRCS 00 2
LINK 3: RCS BRCS 00 2
If
no protection lines recorded in
step 4
one protection line recorded in
step 4
two or more protection lines re-
corded in step 4
Access the carrier level of the MAP display by typing
> TRKS;CARRIER;POST SMSR smsr_no link_no
and pressing the Enter key.
where
smsr_no
is 0-127 range for NT40 and 0-255 range for DMS SuperNode.
link_no
is the number of a protection line connected to the faulty card.
Note: This command ensures that a protection line will be displayed.
Example of a MAP response:
CLASS ML OS
TRUNKS 2 0
REMOTE 1 1
N CLASS SITE SMS
0 REMOTE BRSC 0
Proceed to step 8.
Access the carrier level of the MAP display by typing
> TRKS;CARRIER;POST SMSR smsr_no link_no SMSR smsr_no
link_no ...
and pressing the Enter key.
where
smsr_no
is 0-127 for NT40 and 0-255 for DMS SuperNode.
link_no
is the number of a protection line connected to the faulty card.
;Protline;
;Protline;
0;CAP MS;STATUS:OK
1;CAP MS;STATUS:SysB
Do
step 9
step 5
step 7
ALARM SYSB MANB UNEQ OFFL CBSY PBSY INSV
4 1 0 22
3 5 1 0
CK D ALARM SLIP FRME
2 C 0
;MSGCOND:OPN
;MSGCOND:CLS
5 0 0 255
0 1 0 10
BER ES SES STATE
0 <–7 0 0 SysB