Nortel DMS-100 Series Replacement Procedures page 41

14 Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
15 Use the following information to determine what step to go to next in this
procedure.
If
one protection line busied in step
8 and you are at the PM level
two protection lines busied in
step 8 and you are at carrier level
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
Do
step 5, then step 16
step 16
NT6X85
in an SMS
(continued)
1-9