Mitsubishi Electric MELSERVO-J4 Instruction Manual page 82

3. DISPLAY AND OPERATION SECTIONS
(b) Parameters of 6 or more digits
The following example gives the operation procedure to change the electronic gear numerator to
"123456" with [Pr. PA06 Electronic gear numerator].
Setting of upper 1 digit
......
......
Press "MODE" to switch to the basic setting parameter screen.
Press "UP" or "DOWN" to select [Pr. PA06].
Press "SET" once.
Press "MODE" once.
Press "SET" once.
The screen flickers. ......
Press "UP" or "DOWN" to
change the setting.
Press "SET" once.
Enter the setting. ...
Press "MODE" once.
3 - 21
Setting of lower 4 digits