Mitsubishi Electric MELSERVO-J4 Instruction Manual page 80

3. DISPLAY AND OPERATION SECTIONS
(b) Setting of 6 or more digits
The following example is the operation method to change the position data of the point table No. 1 to
"123456".
Setting of upper 1 digit
Press the "MODE" button four times.
A point table No. is displayed.
Press the "UP" or "DOWN" button to select
point table No. 1.
Press the "SET" button once.
Press the "SET" button once.
Press the "MODE" button
once.
Press the "SET" button
once.
The screen flickers.
Change the setting value
using the "UP" or
"DOWN" button.
Press the "SET" button
once.
Enter the setting.
Press the "MODE" button once.
3 - 19
Setting of lower 4 digits