Connectors And Pin Assignment - Mitsubishi Electric MELSERVO-J4 Instruction Manual

2. SIGNALS AND WIRING

2.2 Connectors and pin assignment

POINT
The pin assignment of the connectors is as viewed from the cable connector
wiring section.
For the STO I/O signal connector (CN8), refer to chapter 13 of "MR-J4-_A_(-RJ)
Servo Amplifier Instruction Manual".
For the CN1 connector, securely connect the external conductor of the shielded
cable to the ground plate and fix it to the connector shell.
Screw
Cable
Screw
Ground plate
2 - 9