Mitsubishi Electric MELSERVO-J4 Instruction Manual page 79

3. DISPLAY AND OPERATION SECTIONS
(3) Operation method
(a) Setting of 5 or less digits
The following example is the operation method at power-on to set "1" to the sub function of the point
table No. 1.
Press the "UP" "DOWN" button to switch to other item of the same point table No.
Press the "MODE" button to switch to the next point table No.
POINT
After changing and defining the setting values of the specified point table, the
defined setting values of the point table are displayed. After defining the values,
pressing the "MODE" button for 2 s or more to discard the changed setting
values, and the previous setting values are displayed. Keep pressing the "UP" or
"DOWN" button to continuously change the most significant digit of the setting
values.
To the next item setting
Press the "MODE" button four times.
A point table No. is displayed.
Press the "UP" or "DOWN" button to select
point table No. 1.
Press the "SET" button once.
Press the "UP" button five times.
Press the "SET" button twice.
The setting value of sub function of specified Point
table No. flickers.
Press the "UP" button once.
During flickering, the set value can be changed.
Set using the "UP" or "DOWN" button.
Press "SET" to enter.
3 - 18