Error/Message List - Mitsubishi Electric MELSERVO-J4 Instruction Manual

11. PARAMETER UNIT

11.6 Error/message list

The following errors and messages may be displayed when you use the parameter unit. If an error/message
has displayed, refer to this section and remove its cause.
(1) Error
Item
Communication error
Setting error
Writing error
EEP-ROM writing
error
11 - 20
Display
1. Hardware malfunction
2. Mismatch in station No.
3. Mismatch in baud rate
Incorrect input, etc.
A value was written while writing was
disabled.
1. A part in the parameter unit is failure.
2. The number of writing times to EEP-
ROM exceeded 100,000 times in the
parameter unit.
Cause