Mitsubishi Electric MELSERVO-J4 Instruction Manual page 71

3. DISPLAY AND OPERATION SECTIONS
(3) Changing the status display screen
The status display item of the servo amplifier display shown at power-on can be changed by changing
[Pr. PC36] settings. The item displayed in the initial status changes with the control mode as follows.
Control mode
Position
Position/speed
Speed
Speed/torque
Torque
Torque/position
Positioning (point table method/program
method)
Positioning (indexer method)
Cumulative feedback pulses
Cumulative feedback pulses/servo motor speed
Servo motor speed/analog torque command voltage
Analog torque command voltage
Analog torque command voltage/cumulative feedback
Cumulative feedback pulses
3 - 10
Status display
Servo motor speed
pulses
Current position