Mitsubishi Electric MELSERVO-J4 Instruction Manual page 283

Hide thumbs Also See for MELSERVO-J4:

Table of Contents

7. PARAMETERS

When using a linear servo motor, select any linear servo motor with [Pr. PA17] and

[Pr. PA18]. Set this and [Pr. PA17] at a time.

Refer to the table of [Pr. PA17] for settings.

type setting

Select a reference range and writing range of the parameter.

To enable read/write the positioning control parameters ([Pr. PT_ _ ]), set [Pr. PA19] to

"0 0 A B" in the positioning mode.

writing inhibit

Refer to table 7.4 for settings.

Table 7.4 [Pr. PA19] setting value and reading/writing range

Reading Only 19

Writing Only 19

Writing Only 19

Writing Only 19

Writing Only 19

Writing Only 19

Control mode

Show Quick Links

Table of Contents

Troubleshooting