Mitsubishi Electric MELSERVO-J4 Instruction Manual page 156

4. HOW TO USE THE POINT TABLE
(3) Position data unit
The display unit is expressed in the unit set in [Pr. PT26], and the feed length multiplication is expressed
in the unit set in [Pr. PT03].
When the unit is set in degrees, the roll feed display function is disabled.
Refer to section 4.2.2 for details.
(4) Operation method
Only the status display of the current position and command position changes. The operation method is
the same as each operation mode.
Operation mode
Automatic operation Automatic operation using the point table
Manual operation JOG operation
Manual pulse generator operation
Home position return mode
4 - 69
Detailed explanation
Section 4.2.2
Section 4.3.1
Section 4.3.2
Section 4.4