Parameter Unit - Mitsubishi Electric MELSERVO-J4 Instruction Manual

11. PARAMETER UNIT

11. PARAMETER UNIT
Connecting the parameter unit to the servo amplifier enables simple execution of such as data setting, test
operation, and parameter setting without using MR Configurator2.
POINT
The parameter unit cannot be used with MR Configurator2.
The parameter unit with software version B0 or later can be used with MR-J4-
_A_-RJ servo amplifiers.
When using the parameter unit, set "1 _ _ _" in [Pr. PF34].
11 - 1