Mitsubishi Electric MELSERVO-J4 Instruction Manual page 67

3. DISPLAY AND OPERATION SECTIONS
(c) Linear servo motor control mode
Override level
Cumulative feedback pulses
Note 1. The displays in the frames are from the cumulative feedback pulses of positioning
mode to unit total power consumption 2 (increment of 100 kWh) with some
displays omitted.
2. The displays in the frames are from the current position of positioning mode to
override level with some displays omitted.
3 - 6
(Note 1)
Cumulative feedback
pulses
Unit total power
consumption 2
(increment of
100 kWh)
Z-phase counter low
Z-phase counter high
Electrical angle low
Electrical angle high
(Note 2)
Current position
Override level