Slow Logging Settings And Graph - Watts AERCO Edge [ii] Operation Manual

Edge [ii] Controller Operation Manual
SECTION 5: TRENDING

5.2 Slow Logging Settings and Graph

Complete the instructions below to select the parameters for the Slow Logging graph.
Main Menu → Trending → Slow Logging
1. Go to:
Figure 5.2-1: Trending: Slow Logging Settings Screen
2. Press Parameters to Plot. The Select Plot Parameters screen opens, displaying the
parameters available in this graph. You can select up to 4 parameters. The selected item(s)
turn green.
Figure 5.2-2: Trending: Select Plot Parameters Screen – Slow Logging
3. To set the logging duration (X-Axis), press the Duration field on the Slow Logging
Settings screen (Figure 5.2-1, above) and then choose the duration.
Figure 5.2-3: Trending: Select Logging Duration Screen – Slow Logging
•
OMM-139_E 8/25/2020
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Settings.
Page 91 of 196