Ez Setup: Standalone - Dwh (Domestic Hot Water) Application - Watts AERCO Edge [ii] Operation Manual

For benchmark boilers
Table of Contents

Advertisement

Edge [ii] Controller Operation Manual
SECTION 2: EZ SETUP
Pressing Next takes you to the Select BAS Mode screen; skip to
the Installation
for instructions.
Figure 2.2.1-9: Standalone – Space Heating: Space Heating Outdoor Reset Screen
2.2.2 EZ Setup: Standalone – DWH (Domestic Hot Water) Application
Complete these instructions only if you chose Domestic Hot Water at the end of Section 2.2.
Figure 2.2.2-1: Standalone – DHW: Select Your Boiler Application Screen
1. The Domestic Hot Water Operating Mode screen appears. Choose the DHW Operating
Mode (its square turns green) then press Next to go to that option's screen:
If you chose Constant Setpoint, proceed to Step 2.
If you chose Remote Setpoint, skip to Step 3.
Figure 2.2.2-2: Standalone – DHW: DHW Operating Mode Screen
OMM-139_E
8/25/2020
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Section 2.4: Completing
Page 24 of 196

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents