Edge [ii] Controller Operation Manual
SECTION 4: DIAGNOSTICS
SECTION 4: DIAGNOSTICS
The Diagnostics menu provides access to a number of tools you can use to diagnose a
suspected or observed fault. It is accessed by pressing Diagnostics on the Main Menu
This Section includes the following topics:
4.1: Manual Run
4.2: Front Panel
4.3: Analog Outputs and Relays
4.3.1: Relays
4.3.2: Analog Outputs
4.4: Subsystems
4.4.1: Air Fuel Valve Stepper Motor
4.4.2: Blower
4.4.3: Ignition
4.5: System
4.5.1: Pre-Start Up
4.5.2: Versions
WARNING:
Before starting the instructions in this section for the first time, you must ensure that the unit
has the latest Edge Controller firmware. Complete the instructions in
Update
to obtain and install the latest firmware.
•
OMM-139_E
8/25/2020
Figure 4.0: Diagnostics Menu
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
4.6: Comm & Network
4.6.1: IP Network
4.6.2: BAS
4.6.3: onAER
4.6.4: Smart Device
4.6.5: USB Storage
4.7: Input/Output Summary
Section 6.2.7: Firmware
Page 75 of 196