Watts AERCO Edge [ii] Operation Manual page 146

Edge [ii] Controller Operation Manual
SECTION 6 – ADVANCED SETUP
BACnet MSTP
Figure 6.4.1-2: Comm & Network: BAS Screen
Figure 6.4.1-3: Comm & Network: BAS Screen, BAS = Modbus RTU
3. The table below lists the parameters available depending on the option chosen in Step 2:
TABLE 6.14: BAS Parameters
Parameters Available
Baud Rate
Communication Address
Node Offset
Device Instance
Port Number
Local IP Address
Status
BAS Temp Format
Security
• BAS IP (Security = Enabled)
• BAS MAC (Security = Enabled)
The following are descriptions of each parameter:
Baud Rate: Choose between: 9600, 19200, 38400 or 115200.
•
Communication Address: Specify the network address of the Edge Controller on
•
the BAS network. (Range: 0 to 127)
•
OMM-139_E 8/25/2020
IP
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Modbus TCP
BACnet
MSTP RTU
✓ ✓
✓ ✓
✓
✓
✓ ✓
✓ ✓
Modbus
TCP
✓
✓
✓
✓
✓
✓
✓
Page 146 of 196