Timeout; The Unit & Plant Status Screens - Watts AERCO Edge [ii] Operation Manual

Edge [ii] Controller Operation Manual
SECTION 1: INTRODUCTION

1.11 Timeout

There is one timeout for both screen sleep mode and password level exit. The timeout is
defined as inactivity on the touchscreen and all front panel buttons.
•
The default timeout period is 60 minutes.
•
When a timeout occurs, the touchscreen goes into sleep mode and resets the access
level to the default.
•
Any activity on the control panel (including a tap on the touchscreen) will activate the
touchscreen and display the Enter Password screen.
•
1.12 The Unit & Plant Status Screens
The Unit Status screen is the touchscreen's default screen for Benchmark boilers. It is selected
by pressing Unit Status on the Main Menu.
Figure 1.12: Example Unit Status Screen – Status Message Displayed
This screen also appears when the unit powers on (after the splash screen), comes out of sleep
mode and has a successful flame ignition. You can manually navigate away from this screen at
any time, or the system will automatically transition to Ignition screen during the Ignition
sequence.
•
OMM-139_E 8/25/2020
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Page 15 of 196