Section 7: Unit Status - Watts AERCO Edge [ii] Operation Manual

Edge [ii] Controller Operation Manual
SECTION 7 – UNIT STATUS

SECTION 7: UNIT STATUS

The Unit Status screen provides access to a variety of parameters that show the status of the
unit. In addition, in a BST Cascade, on the unit designated as a "Manager," it provides access to
screens that display parameters showing the status of the entire cascade.
It is accessed by pressing Unit Status on the Main Menu.
This Section includes the following topics:
7.1: Ignition Sequence
7.1.1: Demand
7.1.2: Auxiliary Delay Timers
7.1.3: Purging
7.1.4: Spark Cleaning
7.1.5: Ignition
7.2: Unit Status
7.3: Plant Status
7.4: BST Cascade Status
7.5 Isolation Valve Status
7.6: SmartPlate Status
7.7: Runtime Statistics
7.8: Unit Event History
7.9 Plant Event History
7.10: AERtrim
7.11: Ignition Sequence Summary
WARNING:
Before starting the instructions in this section for the first time, you must ensure that the unit
has the latest Edge Controller firmware. Complete the instructions in
Update to obtain and install the latest firmware.
•
OMM-139_E 8/25/2020
Figure 7.0: Unit Status Screen
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Section 6.2.7: Firmware
Page 167 of 196