Table of Contents
Advertisement
Edge [ii] Controller Operation Manual
SECTION 1: INTRODUCTION
4. Scroll down till you see the Screensaver Password parameter. It displays the current state
of this parameter, either Enabled or Disabled.
5. If the current state is Disabled, press on Disabled; the state changes to Enabled.
6. Press the Home button. The change is saved and a password is required for all users.
NOTE:
Once the Screensaver Password is Enabled, after the Controller times out, all users will be
prompted to enter a password as soon as they touch any control.
1.6 Main Menu
Once the unit has completed powering up, the touchscreen displays the Main Menu. When you
press on an item in this screen, it turns green, as shown on the right below.
NO SELECTION
All Controller menus and operating parameters are access through the six Main Menu options.
1.7 Controller Font Panel Functionality
The Edge Controller contains a capacitive touchscreen, which is a highly sensitive device. It
continuously checks for user interaction at a very high frequency. Boiler room environments are
sometimes harsh, electromagnetically noisy and dirty, and can experience wide temperature
ranges, all of which can be difficult for sensitive electronic components.
AERCO has taken precautions to ensure proper operation of your unit. We have built the Edge
Controller with a high-quality glass screen for clarity and performance, with an optically bonded
overlay covering the front of the enclosure to prevent dirt and liquids from affecting its operation.
The Edge Controller's front panel consists of a touchscreen display along with a variety of
indicators and buttons, as shown in below image.
•
OMM-139_E
8/25/2020
Figure 1.6: The Touchscreen Main Menu
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
UNIT STATUS SELECTED
Page 10 of 196
Hide quick links:
Advertisement
Table of Contents
