Table of Contents
Advertisement
Edge [ii] Controller Operation Manual
SECTION 7 – UNIT STATUS
7.5 Isolation Valve Status
The Isolation Valve Status screen displays which isolation valves have been designated as
always open (see
Section 6.3.4.4: Valve
also displays the value of the Min # Valves Open parameter, set in
Configuration.
Note, this screen shows the command that the BST Manager is sending the isolation valve. Any
failure on the valve will not be reflected on this screen.
.
7.6 SmartPlate Status
If the cascade includes one or more SmartPlate units, the SmartPlate Status screen appears in
the Unit Status round-robin on the BST Manager unit only. SmartPlate communication must be
enabled for this screen to be displayed (see
→ SmartPlate
Comm).
Figure 7.6: SmartPlate Status Screen (if connected)
•
OMM-139_E
8/25/2020
Configuration), even during plant standby conditions. It
Figure 7.5: Isolation Valve Status Screen
Main Menu → Advanced Setup → BST Cascade
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Section 6.3.4.4: Valve
Page 177 of 196
Hide quick links:
Advertisement
Table of Contents
