Section 2: Ez Setup - Watts AERCO Edge [ii] Operation Manual

Edge [ii] Controller Operation Manual

SECTION 2: EZ SETUP

SECTION 2: EZ SETUP
The EZ Setup function configures the unit as either a Standalone unit or Client or Manager in a
Boiler Sequencing Technology (BST) Cascade group. If the current unit is the "Manager" of a
BST Cascade group, it sets the operating mode for the "Manager" unit. If it is a "Client" unit in a
BST Cascade group, it sets the operating mode for the "Client" unit.
The EZ Setup screen is accessed by pressing EZ Setup on the Main Menu.
Figure 2.0: Main Menu with EZ Setup Selected
This Section includes the following topics:
2.1: Backing Up and Restoring Settings
2.2: EZ Setup - Standalone
2.2.1 EZ Setup – Standalone – Space Heating Application
2.2.2 EZ Setup – Standalone – Domestic Hot Water Application
2.2.3 EZ Setup – Standalone – Other Application
2.3: EZ Setup - Boiler Sequencing Cascade
2.3.1: EZ Setup – BST Cascade – Client Units
2.3.2: EZ Setup – BST Cascade – Manager Units
2.3.2.1 EZ Setup: BST Manager – Single Application
2.3.2.1.1 EZ Setup: BST Manager – Space Heating Application
2.3.2.1.2 EZ Setup: BST Manager – Domestic Hot Water Application
2.3.2.1.3 EZ Setup: BST Manager – Other Application
2.3.2.2 EZ Setup: BST Manager – Two Applications
2.3.2.2.1 EZ Setup: BST Manager – Space Heating and DHW Applications
2.3.2.2.2 EZ Setup: BST Manager – DHW and Other Applications
2.3.2.2.3 EZ Setup: BST Manager – Space Heating and Other Applications
2.4: EZ Setup - Restoring a Previous Setup
WARNING:
Before starting the instructions in this section for the first time, you must ensure that the unit
has the latest Edge Controller firmware. Complete the instructions in
Update to obtain and install the latest firmware.
•
OMM-139_E 8/25/2020
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Section 6.2.7: Firmware
Page 17 of 196