Watts AERCO Edge [ii] Operation Manual page 30

Edge [ii] Controller Operation Manual
SECTION 2: EZ SETUP
Figure 2.3.1-4: BST Client: Client Communication Screen
6. If a previous setup was created and saved, the Load Settings screen appears. If you want
to re-load that setup, press Yes and see
Setup for instructions. Press No to proceed to the next step.
Figure 2.3.1-5: BST Client: Load Settings Screen
7. When you pressed No on the previous screen, the Client EZ Setup Complete screen
appears indicating completion or failure (if it failed, you can press Next to re-run the setup).
This screen includes a reminder that BST Cascade Setup must be run on the BST Manager.
Figure 2.3.1-6: BST Client: Client EZ Setup Complete Screen
•
OMM-139_E 8/25/2020
Section 2.5: EZ Setup – Restoring a Previous
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Page 30 of 196