Touchscreen Button Functionality - Watts AERCO Edge [ii] Operation Manual

Edge [ii] Controller Operation Manual
SECTION 1: INTRODUCTION
Edit
Enter
Clear
The Controller includes touchscreen reset functionality on the front panel. If the touchscreen
becomes non-responsive at any time, simply press the FAULT CLEAR button; this will reset the
touchscreen and should clear the problem.

1.8 Touchscreen Button Functionality

The touchscreen buttons function as follows:
Touchscreen Controls
Icon Name
Previous
Home
Left Right
Up/Down
Page Left
Page Right
Page Up
Page Down
Abort
Next
Save
Retry
Help
•
OMM-139_E 8/25/2020
top left (not the title bar with home/previous icons) and moving right
and then down as in reading a book.
This button allows the editing of the parameter that is currently
selected through use of up/down arrows.
This button allows you to finalize a selection (for instance, a selected
from a menu or from a pop-up (for example, password entry input
completion).
Note, all alphanumeric data entry is entered in the touchscreen.
Clears a fault – the red Fault light goes out.
Description
Takes you to the previous screen.
Takes you to the touchscreen's Main Menu (see Figure 1.6). If
pressed during a procedure, it aborts the procedure.
The LEFT arrow moves to previous point in the array or list and
RIGHT arrow moves to next point in the array or list.
The UP arrow increases a value, DOWN decreases value.
The arrows on left and right edges of the touchscreen scroll Page Left
or Page Right in a round-robin sequence.
On screens with multiple pages, the Page Up and Page Down buttons
moves up and down the pages.
The Abort button appears when a process may need to be exited prior
to completion.
Pressing Next takes you to the next screen in a multi-step procedure.
Some procedures have a Proceed button instead.
1. Pressing SAVE on a pop-up screen saves the entered data and
returns you to the previous screen.
2. Pressing SAVE on a non-popup screen saves the entered data and
takes you to the next screen.
Pressing Retry takes you to the previous screen and re-attempts the
process step that caused the notification message to appear.
Takes you to a Help screen specific to the subject.
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Page 12 of 196