Edge [ii] Controller Operation Manual
SECTION 4: DIAGNOSTICS
4.6.4 Smart Device
The Smart Device screen displays several Bluetooth communication parameters.
Main Menu → Diagnostics → Comm & Network → Smart
1. Go to:
Figure 4.6.4: Comm & Network: Smart Device Screen
2. View the status of the available parameters.
4.6.5 USB Storage
If a USB device is plugged into the USB port on the Controller's left side, the USB Storage
screen displays various parameters about that device (if no devices is plugged in, the screen
just displays the Status parameter).
1. Plug a USB device into the USB port on the Controller's left side.
Main Menu → Diagnostics → Comm & Network → USB
2. Go to:
Figure 4.6.5: Comm & Network: USB Storage Screen
3. View the status of the available parameters.
•
OMM-139_E
8/25/2020
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Device.
Storage.
Page 87 of 196