Fast Logging Settings And Graph - Watts AERCO Edge [ii] Operation Manual

Edge [ii] Controller Operation Manual
SECTION 5: TRENDING

5.1 Fast Logging Settings and Graph

Complete the instructions below to select the settings and display the Fast Logging graph.
Main Menu → Trending → Fast Logging
1. Go to:
Figure 5.1-1: Trending: Fast Logging Settings Screen
2. Press Parameters to Plot. The Select Plot Parameters screen opens, displaying the
parameters available in this graph. You can select up to 4 parameters. The selected item(s)
turn green. Any new selection will create a new plot; the previous selection will be deleted.
Figure 5.1-2: Trending: Select Plot Parameters Screen – Fast Logging
3. Press the Back button to return to the Fast Logging Settings screen.
4. Press the Plot button to create the new graph.
5. Once the graph has been created, you can return to it any time by going to:
Trending → Fast Logging
•
OMM-139_E 8/25/2020
Figure 5.1-3: Trending: Graph Screen
Graph.
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Settings.
Main Menu →
Page 90 of 196