Ez Setup: Standalone - Space Heating Application - Watts AERCO Edge [ii] Operation Manual

Edge [ii] Controller Operation Manual
SECTION 2: EZ SETUP
6. Press on the boiler application that this unit will employ. The selected application turns
green. Press Next and then complete the instructions in the section below that applies to
your choice.
Figure 2.2-5: Standalone: Select Boiler Application(s) Screen
2.2.1 EZ Setup: Standalone – Space Heating Application
Complete these instructions only if you chose Space Heating at the end of the previous
Section.
Figure 2.2.1-1: Standalone – Space Heating: Select Your Boiler Application Screen
•
OMM-139_E 8/25/2020
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Page 20 of 196