ODOMETER STATUS
The system tracks and displays the total amount of material extruded through a liquefier tip since it was last
replaced. To view the tip odometers:
1.
From the Main Menu select
2.
Select
Tip Status
MATERIAL STATUS
You can find the current status of each material canister.
1.
From the Main Menu select
2.
Select
Material Status
Modeler Status
Build Job..
Operator Control..
>Modeler Status..
Maintenance..
and press ENTER. The current status of the tips is displayed.
Temperatures..
Material Status..
>Tip Status..
Machine State
*
Mat'l amount
*Model tip
:
13.0 in3
*Support tip :
54.0 in3
*Tips: Model <T16>
Modeler Status
Build Job..
Operator Control..
>Modeler Status..
Maintenance..
and press ENTER. All active canisters are shown.
Temperatures..
>Material Status..
Tip Status..
Machine State
** Model
1:
PC
*
Model
2:
** Support 1:
PC_S
*
Support 2:
Type of
Material
and press ENTER.
|*Tips: Model T16
|*
Support T16
Support <T16>..
and press ENTER.
|*Tips: Model T16
|*
Support T16
56.4
in3
(Loaded)
in3
(None)
21.4
in3
(Loaded)
in3
(None)
Remaining
Status of each: None, Ready,
Volume
Loaded, At Head, Empty,
Misloaded, No Read
56