Operating The System; Basic User Interface And Operations - Stratasys FORTUS 360mc Manual

FORTUS 360mc/400mc and FDM 360mc/400mc User Guide

Basic User Interface and Operations

The Operator Control Panel consists of a four-line by 40 character display
with keypad. The panel is located on the front right face of the system. The
Operator Control Panel is easy to use. All user interface is menu driven.
Display Screen
Keypad
The operator control panel
• Access material loading and unloading functions along with access
to calibration.
• Open the oven door, top door, and hood.
• Monitor system status.
• Monitor material status (type loaded and amount).
• Monitor job status (number of hours completed, number of hours
total, current build height and total build height, and the name of
job currently being built).
• Turn system power ON or OFF.
• Access network configuration.
• Access the job queue.
• Access the sample job queue.

Operating the System

Figure 4-1: Operator Panel
(Figure 4-1) allows you to:
Chapter 4
Power Up
Button
Power Down
Button
4-1