User Interface; Overview - Stratasys Origin One User Manual

Overview

4 USER INTERFACE

This chapter provides an overview of the Origin One printer User Interface (UI). Specific printer
operation information and procedures can be found in
(page 25). You must power ON the printer prior to using the touchscreen (see
the Printer" (page 25)
Overview
The touchscreen grants access to several aspects of the printer.
• To interact with the printer, tap anywhere on the UI screen. This activates the home screen.
The home screen displays several buttons, sensor readings, and shows the progress of a
print.
• If the strike bars are installed on the door, press Open Door to release the door locks so
that the printer may be opened. For printers without strike bars installed, this button is not
used.
• To magnetically release a tray from the printer, press Release Tray.
• Three buttons on the side of the screen lead to additional sections of the printer interface:
Select Job, System, and Analytics. See
Printer
Status
for instructions).
Figure 1: User Interface Overview
Additional
Screens
If the included strike bars are installed and the machine is actively printing, system
locks will prevent the door from releasing.
© Copyright 2022 Stratasys. All rights reserved.
Chapter 5 Operating the Printer
Figure 1.
Open Door and
Release Tray buttons
"Powering ON
Page 15