Serial Command Reference
Serial Help (HLP)
HLP
Unsaved
CONTROL GROUP:
Description
Query a list of all available serial commands, with brief descriptions and current enabled states.
Subcode
<No Subcode >
Examples:
(HLP?) Retrieve entire command Help listing.
(HLP? "BRT") Retrieve all subcodes/descriptions/enables for BRT control.
Projector Health (HLT)
HLT
Unsaved
CONTROL GROUP:
Description
Any system health errors are placed on the troubleshooting queue. The queue, which contains the problems and
a suggested solution for each one, is read-only. All problems in the queue are read using their index number,
which starts from 0.
Problems are assigned priorities:
1 = Critical - Will result in failure to operate or shutdown
2 = High - Will result in significant loss of functionality but the projector may continue to run
3 = Low - Will result in minor loss of functionality which will not seriously affect projector
Subcode
LSOL
LALL
Examples:
(HLT?) Returns all queued problems.
(HLT? 3) Returns problem index 3 in the queue.
(HLT+LSOL? 4) Returns the solution hint for problem index 4 in the queue.
(HLT+LALL?) Returns all queued problems and their solutions.
(HLT+LALL? 3) Returns problem index 3 and its' solution.
100
Power Down
SUBCLASS:
Description of Use
Request entire command Help listing, or list for a single
command.
Power Down
SUBCLASS:
Description of Use
List solutions.
List one or all problems and solutions.
Operator
ACCESS LEVEL:
Operator
ACCESS LEVEL:
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)