Rear Projection (Sor); Serial Port Baud Rate (Bdr) - Christie G Series Application Manual

Rear Projection (SOR)

Use this command to reverse the image so it can be projected from behind a translucent screen.
Subcode
None
Read/Write
Yes
Examples
Command
(SOR0):Off
(SOR1):On
Rear Projection (SOR)
Use this command to reverse the image so it can be projected from behind a translucent screen.
Subcode
None
Read/Write
Yes
Examples
Command
(SOR0):Off
(SOR1):On

Serial Port Baud Rate (BDR)

Use this command to set the serial port baud rate. The default is 115200.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Turns rear projection off.
Turns rear projection on.
Turns rear projection off.
Turns rear projection on.
Description
Description
Commands
42