Network Routing (NTR)
NTR
Preference
CONTROL GROUP:
Description
Set routing for ASCII messages.
Subcode
<No Subcode >
Examples:
(NTR?L) List routing options.
(NTR 0) Set routing so that each connection is routed separately.
(NTR 3) Set routing to full daisy-chaining.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Power Down
SUBCLASS:
Description of Use
Used to enable or disable daisy chaining.
0 = RS-232, RS-422 & Ethernet communications are all
separate from one another
1 = RS-422 port(s) is/are connected to the RS-232 network
2 = The Ethernet port is connected to the RS-232 network
3 = RS-232, RS-422 & Ethernet are all connected to each other
Serial Command Reference
Operator
ACCESS LEVEL:
109