Logical Shutter (Lsh); Serial Mode (Mde) - Christie Matrix StIM-WQ User Manual

Logical Shutter (LSH)

LSH
Unsaved
CONTROL GROUP:
Description
Turns OFF the LEDs in the projector to simulate a shutter operation.
Subcode
<No Subcode >
Examples:
(LSH 1) Turn Off the LEDs.
(LSH ?) Report current logical shutter setting.

Serial Mode (MDE)

MDE
Preference
CONTROL GROUP:
Description
Set the mode for a serial communications port. Settings such as bits, parity and stop bits are grouped together
into one selection.
Subcode
PRTA
PRTB
PRTC
Examples:
(MDE+PRTA "8N1") Set mode on port A to 8-bit, no parity, 1 stop bit.
(MDE+PRTA "7E1") Set mode on port A to 7-bit, even parity, 1 stop bit. 
(MDE+PRTA "7O1") Set mode on port A to 7-bit, odd parity, 1 stop bit. 
(MDE+PRTA?) Get mode (MDE+PRTA!"8N1").
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Power Up
SUBCLASS:
Description of Use
0 Normal projection mode
1 Black (turns OFF light)
Power Down
SUBCLASS:
Description of Use
Set the mode on port A (RS-232 In).
Set the mode on port B (RS-232 Out).
Set the mode on port C (RS-422).
Serial Command Reference
Operator
ACCESS LEVEL:
Advanced
ACCESS LEVEL:
107