Upgrade Software; Requirements - Christie Matrix StIM-WQ User Manual

Upgrade Software

Upgrade Software
The upgrade package is a single file, which comprises all the firmware and software needed to
operate the projector. The upgrade process updates the firmware files as necessary. Hardware that is
up-to-date is not upgraded.

Requirements

• Version: 1.0.0 or higher
• Internet Explorer 6.0/7.0 (IE7 is recommended)
• Ethernet connection to projector
• Workstation that can connect to the projector via Ethernet
It is recommended to be in Standby Mode before starting the upgrade procedure.
1. Apply power to
projector.
2. Open Internet Explorer
and browse to http:/
/<ipaddress> where
<ipaddress> is the IP
address of the
projector. The login
screen appears.
3. Log in using the admin
account. If you are
unable to login under
admin it may be that
the password has been
changed. Check with
the projector
maintainer for the
correct password.
4. Select the Admin tab.
5. Click Upgrade.
If the Upgrade button is greyed out the projector may not be in Standby mode. Select the
Main tab and look under the Power field to verify the current mode. If the projector is not in
Standby mode, power the project Off and try again.
66 Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)