Christie Matrix StIM-WQ User Manual page 128

Serial Command Reference
RTE
GPIO Events:
(RTE G "AAAAAAA" "description" "command")
where A is GPIO Input for each pin:
= X (don't care)
= H (when pin is high) - See
= L (when pin is low) - See
Delete All Events:
(RTE X *)
Delete a single event:
(RTE X A), where A is the event to be deleted (0-??)
Subcode
<No Subcode>
Example:
Single Occurrence Events:
(RTE T 2008/12/25 11:48:00 S "description" "(LSH 1)") - close the shutter at 11:48:00 on December 25, 2008
Daily Occurring Event:
(RTE T 2009/01/01 23:00:00 2009/02/01 D 1 "description" "(PWR 1)") - power on the projector every day at
23:00:00, starting from January 1, 2009 until February 1, 2009
(RTE T 2009/01/01 23:00:00 2009/02/01 D 2 "description" "(PWR 1)") - power on the projector every other day
at 23:00:00, starting from January 1, 2009 until February 1, 2009
(RTE T 2009/01/01 23:00:00 2009/02/01 D 5 "description" "(PWR 1)") - power on the projector every fifth day
at 23:00:00, starting from January 1, 2009 until February 1, 2009
Weekly Occurring Event:
(RTE T 2009/01/01 23:00:00 2009/03/01 W 1 "SSu" "description" "(PWR 0)") - power off the projector every
week, on Saturday and Sunday at 23:00:00, starting from January 1, 2009 until March 1, 2009 (inclusive)
(RTE T 2009/01/01 23:00:00 2009/03/01 W 2 "MTWThF" "description" "(PWR 1)") - power on the projector
every other week, on every weekday at 23:00:00, starting from January 1, 2009 until March 1, 2009 (inclusive)
(RTE T 2009/01/01 23:00:00 2009/03/01 W 5 "MTWThF" "description" "(PWR 1)") - power on the projector
every fifth week, on every weekday at 23:00:00, starting from January 1, 2009 until March 1, 2009 (inclusive)
Monthly Occurring Event:
(RTE T 2009/01/1 23:00:00 2010/01/01 M 1 "description" "(PWR 0)") - power off the projector on the 1st day of
every month at 23:00:00, starting January 1, 2009 until January 1, 2010 (inclusive)
(RTE T 2009/01/10 23:00:00 2010/01/01 M 12 "description" "(PWR 0)") - power off the projector on the 12th
day of every 12 months at 23:00:00, starting January 12, 2009 until January 1, 2010 (inclusive)
(RTE T 2009/01/31 23:00:00 2010/01/01 M 2 "description" "(PWR 0)") - power off the projector every other
month on day 31 starting January 31, 2009 until January 1, 2010 (inclusive)
Function Key Events:
(RTE F 1 "description" "(LSH 0)") - open the shutter if Func+1 is pressed on the remote.
(RTE F 2 "description" "(LSH 1)") - close the shutter if Func+2 is pressed on the remote.
System Events:
(RTE S 1 1 "description" "(CLE 5)") - change color to cyan when system powers up.
116
GIO
on page 99.
GIO
on page 99.
Description of Use
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)